Bạn đang xem: Lỗi a disk read error occurred press ctrl+alt+del to restart
If you encounter A disk read error occurred on your Windows 10, don’t worry. Whatever the cause is, you can troubleshoot the issue & solve the problem with the following tried-and-true fixes.
Try these fixes:
No.1–Unplug any USB or DVD drive
No.2–Shut down your computer & cool it down for several hours
No.3-–Reset or update your BIOS
No.4–Check your hard drives’ cables
No.5–Test RAM memory
No.6– Fix MBR and Fix Boot
Fix 1. Unplugany USB or DVD drive
If you have plugged in any removable flash drives lượt thích USB or DVD, make sure khổng lồ unplug them và then try to lớn reboot your Windows 10. It’s possible that your system is trying khổng lồ boot from one of the connected devices due to modification in boot priority.
After removing all these devices, kiểm tra if the error still persists.
If you see the error again, there might be something wrong with your hard drive or configuration. You can move on lớn the next fix to solve the problem.
Fix 2. Shut down your computer and cool it down for several hours
OnceA disk read error occurred pops upon your Windows 10, you need khổng lồ shut down your computer and cool it down for a few hours lượt thích 5-8 hrs to lớn give it a rest. After cooling down, turn on your computer lớn see if you can access Windows 10 normally.
It’s very likely that the temperature is causing the error. However, cooling down your computer takes for hours, you can skip khổng lồ the next fix if you’re in a rush.
If the your computer works properly, you need lớn back up your data & files lớn an external drive immediately before bumping into the same problem again.
Fix 3. Reset or update your BIOS
Resetting BIOS could fixA disk read error occurrederror by restoring your system’s mặc định settings. Here is how to bởi vì it:
1) Make sure you computer is turned off.
2) Turn on your computer and pressF12 till BIOS screen pops up.
Note: The key to lớn enter BIOS usually is F12, but also could be F1, F10, Del, etc. Just look carefully onthe screen while your computer starts or kiểm tra your user manual lớn know the exact key.
2) Use the down arrow key ↓to choose Load thiết lập Defaults to reset your BIOS, then pressEnter. ChooseYESwhen you’re prompted khổng lồ confirm the setup.
Note: For different computers, the option khổng lồ reset BIOS could also beLoad Fail-Safe Defaults, Apply Default, Load BIOS Defaults, Load mặc định Settings, Load cài đặt Default, Factory settings, etc.
3)Use the down arrow key ↓ to choose Exit Saving Changesto exitBIOS.
4) Restart your computer to check if you can boot into your Windows 10 now.
Alternatively, you can also try khổng lồ update your BIOS lớn fix disk read error. You should always have the latest BIOS version installed.
Fix 4. Kiểm tra your hard drives cables
Check the cables connect your computer’s hard drives to your computer’s motherboard under its hood. If the cable is loose or defective, disk errors may occur.
In this case, open yourcomputer’s hood and check ifeach cable is fastened on both ends. Disconnect them, inspect the cables for any damage & then connect them firmly. Be sure to replace the faulty cables if you find any.
Fix 5.Test RAM memory
RAM(Random Access Memory)problem brings about various issues. Asthe RAM memory kiểm tra is easy and non-destructive, you may as well doa complete thử nghiệm for RAM memoryto fix the disk error.
Xem thêm: Sửa Lỗi Laptop Ko Kết Nối Được Wifi Đơn Giản Và Hiệu Quả Cho Bạn
Now you can see if you can boot into Windows again. If not, don’t give up here, you can try the next fix lớn solve the problem.
Fix 6. Fix MBR and Fix Boot
This error might occur if there’s a problem with the Master Boot Record (MBR) tệp tin or the boot sector. To lớn fix them, you will need the original Windows 10 installation disc to repair the MBR và the boot sector. Here’s how to vị it:
1) Boot from the original disk, then select the language.
2) Click Repair your computer, then select Command Prompt.
3) Enter the following Commands in the Command prompt separately & press Enter after each command:
bootrec /FixMbrbootrec /FixBootbootrec /ScanOsbootrec /RebuildBcd 4) Now remove the disc from the drive.
5) Type exit & hit Enter.
exit6) Now restart your computer and kiểm tra if Windows is booting normally.
If unluckily, A disk read error occurredstill exists afteryou tried all the fixes above, you can try to vì chưng a clean install of Windows 10.
Bonus Tips:
If you run into computer problems randomly, there might be something wrong with your drivers. Missing or outdated drivers can cause many issues. If you want khổng lồ have better computer experience and prevent potential problems, it’s recommended khổng lồ keep your drivers update to date.
To update your device drivers, you can visit the manufacture’s official website lớn find exactly the right the driver online, download it & install it step by step. You’ll need some computer skills & patience khổng lồ update your drivers this way.
If you don’t have time or patience to manually update your network drivers, you can bởi it automatically with Driver Easy. It’s all done with just a couple of mouse clicks – easy even if you’re a computer newbie.
Driver Easy will automatically recognize your system và find the correct drivers for it. You don’t need khổng lồ know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, & you don’t need to worry about making a mistake when installing.
You can update your drivers automatically with either the miễn phí or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full tư vấn and a 30-day money back guarantee):
1) Download & install Driver Easy.
2) Run Driver Easy và click the Scan Now button. Driver Easy will then scan your computer & detect any problem drivers.
3) Click the Update button next to lớn the flagged driver to lớn automatically tải về the correct version of that driver, then you can manually install it (you can vị this with the không lấy phí version).
Or
Click Update All khổng lồ automatically tải về and install the correct version of all the drivers that are missing or out of date on your system. (This requires the Pro version which comes with full support and a 30-day money back guarantee. You’ll be prompted khổng lồ upgrade when you click Update All.)
4) Restart your computer for the changes to lớn take effect.
Note: If you have any problems while using Driver Easy, feel miễn phí to contact our tư vấn team at support
Hopefully, one of these fixes can help you sole your disk read error. If you have any questions, feel không lấy phí to địa chỉ cửa hàng a comment below and let us know.
